Configures scope shift for the current tunnel of the received packet.
Route-map config mode
The no form of the command disables scope shift for the route-map.
When scope shift is enabled, the packet headers are not decapsulated. The scope of the header is shifted to inner headers in the packet. Further blocks in the packet processing pipeline start using inner headers of the packet.
The following example configures scope shift for the route-map.
device(conf)# route-map rmap1 10 device(conf-route-map)# new-scope device(config-route-map)# do show route-map all route-map rmap1 10 forward-action deny decap new-scope Policy matches: 0 packets, 0 bytes, 0 Packets/sec, 0 Bits/sec