truncate

Truncates received packets to the configured length for the current route map or listener policy.

Syntax

truncate length

no truncate

Parameters

length: Specifies the truncated length of received packets. The valid range is 64 to 9000.

Modes

Route-map config mode

Listener-policy config mode

Route-map config mode

Examples

The following example configures received packets to a length of 100 for the current route map and uses the show command to verify configuration.

device# configure terminal
device(config)# route-map mall2
device(config-route-map)# truncate 100
device(config-route-map)# end

device# show route-map mall2 
route-map mall2 45 
forward-action permit  
truncate 100 
Policy matches: 0 packets, 0 bytes, 0 Packets/secRate, 0 Bits/secRate

The following example configures received packets to a length of 63 for the listener policy.

device# configure terminal   
device(config)# listener-policy lp1 <sId>  
device(config-listener-policy)#   truncate 63

The following example deletes configured truncation for received packets for the current route map.

device(config)# route-map mall2
device(config-route-map)# no truncate