show lacp interface ethernetNEW!

Displays the LACP information for a specific interface.

Syntax

show lacp interface ethernet IFNAME

Parameters

interface ethernet IFNAME: Specifies the interface name in slot/port or slot/port:breakout format. Example: 1/1, 1/1-3, 5, 2/7-9, 10:1-4.

Modes

Exec mode

Examples

The following example shows LACP information.

device# show lacp interface ethernet 1/8:1 
interface Eth 1/8:1 is up 
     Channel group is 100 port channel is Po100 
     PDUs sent: 72 
     PDUs rcvd: 71 
     LACP Rx errors: 0 
     LACP Tx errors: 0 
     LACP unknown errors: 0 
     LACP errors: 0 
Local Port: Eth 1/8:1   MAC Address = 40:88:2f:c1:02:00 
    System Identifier = 80:00:40:88:2f:c1:02:00 
    Port Identifier = 0x8000, 0x1a0 
    Operational key = 100 
    LACP_Activity = active 
    LACP_Timeout = Long Timeout (30s) 
    Synchronization = IN_SYNC 
    Collecting = true 
    Distributing = true 

Partner information 
    Partner-id = 80:00:60:9c:9f:b1:3a:00 
    Partner-key = {1, 11}