show interface port-channel

Displays the port-channel information.

Syntax

show interface port-channel PORANGE detail
show interface port-channel brief

Parameters

port-channel PORANGE
Specifies the channel number or channel number range. The range is 1-255.
detail
Displays detail information of the specified port-channel.
port-channel brief
Displays brief information of the specified port-channel.

Modes

Exec mode

Usage Guidelines

This command is available only to users with the admin role.

Examples

The following examples show interface port-channel information.

device# show interface port-channel 1
port-channel 1 is up 
    MTU 9216 Bytes 
    IfIndex 0x40000201 
    Port mode is Full Duplex, 100 Gb/s 
    LagType is Static 
    MinLinks is 1 
    Load balance method uses Src/Dst IP, Src/Dst L4 port and 
      protocol 
    Active Members in this channel: Eth 1/1 
    Members in this channel: Eth 1/1 
 
Statistics 
 Carrier Transitions: 3 
           LastClear: 37m48.716951005s 
Input: 
          Broadcast Pkts: 0 
            Discard Pkts: 0 
             Errors Pkts: 0 
              FCS Errors: 0 
              MCast Pkts: 0 
                  Octets: 0 
              UCast Pkts: 0 
       Unknown Protocols: 0 
Out: 
          Broadcast Pkts: 0 
            Discard Pkts: 0 
             Errors Pkts: 0 
              MCast Pkts: 0 
                  Octets: 0 
              UCast Pkts: 0 

device# show interface port-channel 1-2,5 
port-channel 1 is down 
    MTU 9216 Bytes 
    IfIndex 0x40000200 
    Port mode is Full Duplex, SpeedUnknown 
    LagType is Static 
    MinLinks is 1 
    Load balance method uses Src/Dst IP, Src/Dst L4 port and protocol 
    Active Members in this channel: Nil 
    Members in this channel: Nil 
 
Statistics 
 Carrier Transitions: 0 
           LastClear: 0s 
Input: 
          Broadcast pkts: 0 
            Discard pkts: 0 
             Errors pkts: 0 
              FCS Errors: 0 
              MCast pkts: 0 
                  Octets: 0 
              UCast pkts: 0 
       Unknown Protocols: 0 
Out: 
          Broadcast pkts: 0 
            Discard pkts: 0 
             Errors pkts: 0 
              MCast pkts: 0 
                  Octets: 0 
              UCast pkts: 0 
 
port-channel 2 is down 
    MTU 9216 Bytes 
    IfIndex 0x40000201 
    Port mode is Full Duplex, SpeedUnknown 
    LagType is Static 
    MinLinks is 1 
    Load balance method uses Src/Dst IP, Src/Dst L4 port and protocol 
    Active Members in this channel: Nil 
    Members in this channel: Nil 

Statistics 
 Carrier Transitions: 0 
           LastClear: 0s 
Input: 
          Broadcast pkts: 0 
            Discard pkts: 0 
             Errors pkts: 0 
              FCS Errors: 0 
              MCast pkts: 0 
                  Octets: 0 
              UCast pkts: 0 
       Unknown Protocols: 0 
Out: 
          Broadcast pkts: 0 
            Discard pkts: 0 
             Errors pkts: 0 
              MCast pkts: 0 
                  Octets: 0 
              UCast pkts: 0 
port-channel 5 is down 
    MTU 9216 Bytes 
    IfIndex 0x40000204 
    Port mode is Full Duplex, SpeedUnknown 
    LagType is Static 
    MinLinks is 1 
    Load balance method uses Src/Dst IP, Src/Dst L4 port and protocol 
    Active Members in this channel: Nil 
    Members in this channel: Nil 
Statistics 
 Carrier Transitions: 0 
           LastClear: 0s 
Input: 
          Broadcast pkts: 0 
            Discard pkts: 0 
             Errors pkts: 0 
              FCS Errors: 0 
              MCast pkts: 0 
                  Octets: 0 
              UCast pkts: 0 
       Unknown Protocols: 0 
Out: 
          Broadcast pkts: 0 
            Discard pkts: 0 
             Errors pkts: 0 
              MCast pkts: 0 
                  Octets: 0 
              UCast pkts: 0
The following examples show detail information of the port-channel when same speed member-ports are present.
device# show interface port-channel 2 detail

port-channel 2 is up
    Number of Active Members: 4
    Number of Members: 4

Port         Status        Speed
---------------------------------------------
Eth 2/8:1    active        10G
Eth 2/8:2    active        10G
Eth 2/8:3    active        10G
Eth 2/8:4    active        10G

device# show interface port-channel 2 detail

port-channel 2 is up
    Number of Active Members: 3
    Number of Members: 4

Port         Status        Speed
---------------------------------------------
Eth 2/8:1    passive       10G
Eth 2/8:2    active        10G
Eth 2/8:3    active        10G
Eth 2/8:4    active        10G

The following example shows detail information of the port-channel when different speed member-ports are present.

device# show interface port-channel 2 detail

port-channel 2 is down
    Reason: Different speed member-ports are present !
    Number of Active Members: 0
    Number of Members: 5

Port         Status        Speed
---------------------------------------------
Eth 1/1      passive       100G
Eth 2/8:1    passive       10G
Eth 2/8:2    passive       10G
Eth 2/8:3    passive       10G
Eth 2/8:4    passive       10G
The following example shows brief information of the port-channel.
device# show interface port-channel brief 

Number of interfaces 23 
Port    Mtu     Admin-State   Oper-State  Speed  Ifindex         Description 
------------------------------------------------------------------------------------- 
Po1     9216    DOWN          DOWN        10G    0x40000200    Port-Channel Interface 
Po2     9216    UP            UP          10G    0x40000201    Port-Channel Interface 
Po3     9216    UP            UP          10G    0x40000202    Port-Channel Interface