Configures breakout mode on the supported connectors.
Connector config mode
This command is available only to users with the admin role.
This command is supported only on even numbered ports. Example: 1/8
The port must not be part of a port channel.
The port must be in shutdown state.
The current and the previous port are deleted and four new ports with the breakout speed are created.
The following examples shows how to configure and verify breakout ports.
device(config-connector-1/8)# breakout 4x10g WARN: Enabling breakout on a interface is a disruptive action and will result port 1/7 to be unavailable for use along with defaulting all the configs on port 1/8. device(config-connector-1/8)# breakout 4x10g Port is already in breakout mode.