show running-config egress

Displays configuration information for configured egress.

Syntax

show running-config egress name

Parameters

name: Specifies the name of the egress.

Modes

Exec mode

Usage Guidelines

You can run this command without specifying a name to display configuration information for all.

Examples

The following example shows egress configuration information for ep1.

device# show egress ep1 
           Name : ep1         
       Description : egress_obj_1 
                  
Encap : encap_gre 
    Listener Policy : lp1 
         Precedence : 10 
             Interface : ethernet 1/2

The following example show configuration information for all configured egresses.

device# show egress all
    Name : e1 
       Description : egress_obj_1 
               Encap : encap_gre 
       Listener Policy : v4 
         Precedence : 12 
               Interface : ethernet 1/9