show running-config route-map

Displays route-map configuration information for the current system.

Syntax

show running-config route-map name

Parameters

name: Specifies the name of the route-map.

Modes

Exec mode

Usage Guidelines

You can run this command without specifying a name to display configuration information for all.

Examples

The following example shows configuration information for rmap1.

device# show running-config route-map rmap1
route-map rmap1 10
  forward-action permit

The following example shows configuration information for all route-maps.

device# show running-config route-map
route-map R1 10
  forward-action permit
  match ip access-list test_1
  set egress-group eg_1
route-map R1 12
  forward-action permit
  match ip access-list test_2
route-map rmap1 10
  forward-action permit