show counters egress-group

Displays the egress group counters for the specified egress group.

Syntax

show counters egress-group {name | all }

Parameters

name: Specifies show counters for the the named egress group.; The egress-group-name supports 1-32 characters. Characters allowed are alpha-numeric, underscore, and dot. Underscore is not allowed as the first character.
all: Specifies show counters for all configured egress groups.

Modes

Exec mode

Usage Guidelines

Valid egress group name must be provided.

Examples

The following example shows egress group counters information.

device# show counters egress-group eg1 
Egress-group Packet Statistics : eg_01     

   TX Frames : 500000000 
    TX Bytes : 260000000000

Egress-group Packet Statistics : eg_02     

   TX Frames : 500000000 
    TX Bytes : 260000000000