show counters ingress-group

Displays ingress-group counters information.

Syntax

show counters ingress-group [ name | all ]

Parameters

name: Specifies the name of an ingress group.
all: Specifies counters information for all ingress groups.

Modes

Exec mode

Usage Guidelines

The traffic type must be configured for the ingress group.

Counters for non-transport tunnel type ingress groups is not supported.

Examples

The following example displays all ingress group counters information.

device# show counters ingress-group all 
Number of ingress-groups: 2 
Ingress-group Packet Statistics (Vxlan Tunnel) 
        Name : IgVxlanVni100 
   RX Frames : 0 
    RX Bytes : 0 
Outer Tunnel (Vxlan)
	Rx Frames: 4
	RX Bytes: 788

The following examples show the output for the show counters ingress-group.

VXLAN outer tunnel configuration:

device# show counters ingress-group vxlangtp 

Ingress-group Packet Statistics (GTPU Tunnel) 
   RX Frames : 2 
    RX Bytes : 288

Outer tunnel configuration:

device# show counters ingress-group vxlangtp 

Ingress-group Packet Statistics (GTPU Tunnel) 

   RX Frames : 2 
    RX Bytes : 288 

Outer tunnel (Vxlan): 
   RX Frames : 2 
    RX Bytes : 288

MPLS outer tunnel configuration:

device# show counters ingress-group iggAnyMpls 

Ingress-group Packet Statistics (GTPU Tunnel) 
   RX Frames : 0 
    RX Bytes : 0 

Outer tunnel (MPLS): 
   RX Frames : 585 
    RX Bytes : 74880