Print
this page
Email this topic
Feedback
View PDF
Download EPUBInterfaces
To access the Interfaces Setup screen, click Setup, and then click the Interfaces tab. The Interfaces Setup screen appears (see the following figure).
Interfaces Setup Screen
To change an interface's information, click 
next to
the interface in the table. The information for the interface appears in the relevant boxes.
Click Apply to apply the changes.
| Name/Port | The OneController interface (Admin, EAS0, EAS1). |
| IP Address | Interface's IP address. |
| Enabled | Whether or not the interface is enabled. |
| Allow Management Traffic | Select to allow management traffic over the selected port. |
| Gateway | Interface's gateway. |
| Netmask | Interface's subnet mask. |
| VLAN ID | VLAN ID. |
| Tagged | Whether or not tagging is enabled. |