Antenna Configuration for External Antenna Model Access Point

Image of AP460e access point with external antenna connectors.

Antenna socket radio mapping information

Radio 1 (R1) − antennas 5 and 6
Radio 2 (R2) − antennas 1, 2, 3, and 4
Radio 3 (R3) − antennas 7 and 8

The 2.4G and 5G–8 and the 2.4G and 5G–7 are sensor antenna ports.

Note

The internal BLE is always used unless you attach an antenna to the BLE antenna connector.

Note

The BLE antenna port and the sensor antenna ports come with dust caps installed on them. Do not remove the dust caps until you need to install the antennas.