Install the Access Point on a Flat Surface Using the MBO-ART02 Articulating Mounting Bracket

Before you begin

Note

Note

The MBO-ART02 wall mount bracket is End of Sale (EOS) as of January, 2023. It is replaced by the MBO-ART03 bracket.

For more information, see End of Sale and End Service Life.

The following hardware is required:
  • MBO-ART02 articulating mounting bracket
  • Access point
  • Two M6 hex-head screws is used for attaching the MBO-ART02 articulating mounting bracket to the access point
  • Four M4 hex-head screws are used for attaching the MBO-ART02 articulating mounting bracket to the wall
Note

Note

The MBO-ART02 bracket has +80 degrees to –80 degrees of articulation on each axis.

Procedure

  1. Using the shorter end of the MBO-ART02 bracket end as a template, mark and drill four holes on the wall.
    Click to expand in new window
    MBO-ART02 articulating mounting bracket template for wall attachment holes
    Image of the MBO-ART02 bracket with markings for wall attachment holes
  2. Using two M6 hex-head screws, attach the MBO-ART02 articulating mounting bracket to the access point.
  3. Align the MBO-ART02 articulating mounting bracket holes against the wall attachment holes and attach the bracket using four M4 hex-head screws.
9036418-03 Rev AA