AP460i/e Features

The AP460i/e access points have the following features:
  • Radios:
    • Three 802.11ax radios (one 2×2 2.4GHz radio, one 4×4 5GHz radio, and one 2×2 2.4GHz and 5GHz radio)
    • 1 IoT radio (2.4 GHz)
  • Console port: RJ45
  • Two Ethernet ports:
    • 1×100/1000/2500 Mbps auto-negotiation Ethernet port, RJ45
    • 1×10/100/1000 Mbps auto-negotiation Ethernet port, RJ45
  • LEDs: Seven. All LEDs will be on during reset and connect to general-purpose input/output (GPIO) pins
  • One Reset button
  • Power: PoE 802.3at (for more information on power used at 802.3af and 802.3at modes, see AP460i/e Power Tables)
  • Antennas:
    • Eight WiFi internal/external antennas
    • One BLE internal antenna on AP460i
    • One BLE external antenna port on AP460e
  • Temperature: -40°C to +60°C (-40°F to +140°F) @ 6000 ft.
  • Enclosure: Plastic with metal base
Click to expand in new window
AP460i access point front view
Image of the AP460i access point with numerical callouts indicating the console port and reset button cap, GE2 port, GE1-PoE port on the left side of the image, and vent on the bottom of the access point.
Callout Description
1 Console port and reset button cap
2 GE2
3 GE1-PoE
4 Vent
Click to expand in new window
AP460e access point front view
Image of the AP460e access point with numerical callouts indicating the console port and reset button cap, GE2 port, GE1-PoE port on the left side of the image, and vent on the bottom of the access point.
Callout Description
1 Console port and reset button cap
2 GE2
3 GE1-PoE
4 Vent
Note

Note

On the AP460e access point, the sensor and the BLE antennas come with dust caps on them. Do not remove the dust cap until you need to install the antennas.

For information on the AP460e antenna connectors, see antenna configuration for external antenna model access point.

9036418-03 Rev AA