| Name |
Displays the physical port name reporting runtime data
and statistics. Supported ports vary depending on
model. |
| Type |
Displays the physical port type. |
| Description |
Displays an administrator defined description for each
listed port. |
| Admin Status |
A green check mark means the port is active and currently
enabled with the profile. A red "X" means the port is
currently disabled and not available for use. The interface
status can be modified with the port configuration as
needed. |
| Mode |
The profile's switching mode: either Access or Trunk (as defined on the Ethernet
Port Basic Configuration screen). If
Access is selected, the port accepts
packets only from the native VLAN. Frames are forwarded
untagged with no 802.1Q header. All frames received on
the port are expected as untagged and mapped to the
native VLAN.
If Trunk is selected, the port allows packets
from a list of VLANs added to the trunk. The port
supports multiple 802.1Q tagged VLANs and one native
VLAN which can be tagged or untagged.
|
| Native VLAN |
The VLAN ID (1 - 4094) for the native VLAN. The native
VLAN allows an Ethernet device to associate untagged frames
to a VLAN when no 802.1Q frame is included in the frame.
Additionally, the native VLAN is the VLAN over which
untagged traffic is directed when using a port in Trunk mode. |
| Tag Native VLAN |
A green check mark means the native VLAN is tagged. A red
"X" means the native VLAN is untagged. When a frame is
tagged, the 12-bit frame VLAN ID is added to the 802.1Q
header so upstream Ethernet devices know which VLAN ID
the frame belongs to. The device reads the 12-bit VLAN
ID and forwards the frame to the appropriate VLAN. When
a frame is received with no 802.1Q header, the upstream
device classifies the frame using the default or native
VLAN assigned to the Trunk port. A native VLAN allows an
Ethernet device to associate untagged frames to a VLAN
when no 802.1Q frame is included in the
frame.
|
| Allowed VLANs |
The VLANs allowed to send packets over the listed port.
Allowed VLANs are listed only when the port is in Trunk mode. |
