|
Name
|
Displays whether the reporting radio is radio 1, radio 2
or radio 3. AP 6522, AP 6532, AP 7161 models have 2
radios.
|
|
Type
|
Displays whether the radio has been designated as a
typical WLAN radio or if the radio has been designated
as a sensor.
|
|
Description
|
A brief description provided by the administrator when
the radio's configuration was added or modified.
|
|
Admin Status
|
A green check mark means the radio is enabled for client
or sensor support. A red “X” means the radio is
currently disabled.
|
|
RF Mode
|
Displays whether each listed radio is operating in the
802.11a/n or 802.11b/g/n radio band. If the radio is a
dedicated sensor, it will be listed as a sensor to
define the radio as not providing typical WLAN support.
If the radio is a client bridge, it provides a typical
bridging function and does not provide WLAN support. The
radio band is set in the Radio
Settings tab.
|
|
Channel
|
Lists the channel setting for the radio. Smart is the default setting. Smart
indicates the acces spoint is set for dynamic Smart RF
support. If set to Smart, the access point scans
non-overlapping channels listening for beacons from
other access points. After the channels are scanned, it
selects the channel with the fewest access points. In
the case of multiple access points on the same channel,
it selects the channel with the lowest average power
level.
|
|
Transmit Power
|
Lists the transmit power for each radio. The column
displays smart if Smart-RF is used to set the
transmit power for this radio.
|
|
Overrides
|
Click Clear to clear overrides made to this
radio interface. This field is blank if there are no
overrides for this radio.
|
