AP IOT Imagotag

About this task

The WiNG AP-8432 model access points support SES-imagotag‘s ESL tags. An Imagotag-enabled AP recognizes the ESL communicator and facilitates communication between communicator and tags. To enable an AP-8432 as an infrastructure device facilitating communication between the ESL communicator and tags, an Imagotag policy is applied either to the AP‘s self (standalone AP) or to the AP‘s profile (adopted AP). Use this option to view the configuration of the ESL communicator.

Note

Note

For information on enabling IOT Imagotag on an AP-8432, see Setting the Imagotag Policy

To view an AP-8432 model access point‘s ESL communicator configuration:

Procedure

  1. Select the Statistics menu from the Web UI.
  2. Select System from the navigation pane (on the left-hand side of the screen). Expand an RF Domain, select a controller or service platform, and select one of its connected AP-8432 access point.
  3. Select IOT Imagotag from the AP‘s statistics menu.
    Click to expand in new window
    Statistics → Access Point → IOT Imagotag screen
    GUID-E6499D14-960C-4835-963B-E3E33B8A80C7-low.png
  4. Review the following IOT Imagotag details:
    Enable Displays the status of the policy: Enabled/Disabled. A green check mark indicates that the policy is enabled. A red cross mark indicates that the policy is disabled.
    Dongle Status Displays the ESL communicator (USB Dongle) status - Connected/Disconnected.
    SSL Displays if SSL (Secure Socket Layer) encryption mode of communication is enabled or not. A green check mark indicates that this option is enabled. A red cross mark indicates that this option is disabled.
    FCC-Mode Displays if FCC compatibility mode is enabled or not on the ESL communicator. A green check mark indicates that this option is enabled. A red cross mark indicates that this option is disabled.
    ApId Displays the Imagotag enabled AP‘s ID.
    Channel Displays the channel assigned for ESL communicator to tag communication in the 2.4 GHz band.
    Window Size Displays the transmission window size set for messages exchanged between ESL communicator and tags.
    Payload Size Displays the maximum payload size in packets exchanged between ESL communicator and tags.
    Output Power Displays the maximum output power set for the ESL communicator.
    ACS Displays if ACS (Auto-Channel Selection) status - Enabled/Disabled.
9036315-02 REV AA