Configuring the ExtremeCloud IQ Controller as an NPS Client

  1. Select Start > Administrative Tools > Network Protocol Server.
  2. Expand RADIUS Clients and Servers, right-click RADIUS Clients, and then select New.
  3. Configure the following parameters:
    • Friendly name. Type the name that you want to assign to the ExtremeCloud IQ Controller
    • Client address (IP or DNS). Type the IP address of the ExtremeCloud IQ Controller, and then select Verify.
      Click to expand in new window
      Verify Address
      1. Select Resolve.

        If the IP address is correct, it displays in the Search results text box.

      2. Select OK.
    • Shared Secret. Select a Shared Secret Template (Optional).
      You can opt to enter a Shared Secret manually or have NPS generate the Shared Secret.
      • Manual. Type a password that both the NPS server and the ExtremeCloud IQ Controller will use to mutually authenticate. This password is case-sensitive. You can use alpha-numeric characters. You must configure the same shared secret password for the VNS .
      • Generate. Select Generate to have NPS generate the password. Not all servers support long generated secrets.
  4. Select OK.
9038919-00 Rev. AA