Specifying B@AC Network Topology

ExtremeCloud IQ Controller offers a default VLAN that is Bridged@AP, untagged. Each site can only have one untagged VLAN. For this deployment, we will specify Bridged@AC topology.
  1. Go to Configure > Policy > VLANS > Add and configure the following parameters:
    Name
    test1
    Mode
    Bridged@AC
    VLAN ID
    Specify a valid VLAN ID.
    Port
    If the Mode is Bridged@AC, specify a data port.
    Layer 3
    If the Mode is Bridged@AC, provide the following Layer 3 parameters:
    • IP Address
    • CIDR
    • FQDN
    • DHCP.

      Select Relay, then click Configure to enter the DHCP Relay Server IP address.

    • Enable Device Registration. Indicates that the wireless AP or switch can us this port for discovery and registration.
    • Mgmt traffic. Indicates that this port will be used to manage traffic. Enable Mgmt Traffic to access the ExtremeCloud IQ Controller user interface through this port.
  2. Click Save.

Next, add a network.

9038919-00 Rev. AA