Configuring a AAA Network

Using the same Centralized site: Site_ROW, specify a separate tagged VLAN for the AAA Network, defining a different IP address range for the AAA Network.
Note

Note

You can configure more than one network on a single VLAN, but to configure a separate IP address range for the AAA Network, we will create a separate VLAN.
  1. Go to Configure > Policy > VLAN > Add to create a new VLAN for the AAA Network.

    For more information, see Specifying B@AC Network Topology.

  2. Go to Configure > Networks > Add and configure the following parameters:
    Network Name
    Test2-AAA
    SSID
    Test2-AAA
    Status
    Enable or disable the network service. Disabling the network service shuts off the service but does not delete it.
    Auth Type
    WPA2 Enterprise 802.1x/EAP
    AAA Policy
    Local On-boarding

    This option is not displayed for WLAN Networks that do not require authentication or authorization. The value Local Onboarding refers to RADIUS requests that are directed through the ExtremeCloud IQ Controller. Local Onboarding is the default value for WLAN Networks configured for Internal Captive Portal. AAA Policy can only be configured for WLAN Networks requiring MACAUTH, External Captive Portal, or EAP.

    To use AAA Policy to bypass ExtremeCloud IQ Controller, create a policy with RADIUS servers and a NAS IP address, then specify the policy here. To get started, go to Configure > AAA Policy > Add. For more information, see the ExtremeCloud IQ Controller User Guide or Online Help.

    Authentication Method
    Default
    Default AAA Authentication Method
    Local
    LDAP Configuration
    None
    Default Auth Role
    Quarantine

    Defines the default Accept Policy for a client attempting to join the network. When an authenticated client does not meet rule conditions on an 802.1x AAA Network, the default policy role is Quarantine.

    Default VLAN
    test2 (This is the VLAN we created for the AAA Network.)
  3. Select Save.
Note

Note

To activate the Scheduling button and schedule when network services are enabled, install the Extreme Scheduler Application on ExtremeCloud IQ Controller. For more information, see the ExtremeCloud IQ Controller User Guide.

Next, work with engine rules.

9038919-00 Rev. AA