Summit X450e-48p Switch Ports and Slots

The front panel of the Summit X450e-48p switch includes:

• Forty-four fixed autosensing 10/100/1000 BASE-T PoE ports (ports 1–44) that provide high-density copper connectivity and a full 15.4 Watts of PoE per port when used with the EPS-C/EPS-600LS
• Four combination ports (ports 45–48) using RJ45 connectors and SFPs to provide 4 Gbps of copper or fiber connectivity

  For more information about combination ports, see Combination Ports and Failover.

  For information about SFPs, see the Extreme Networks Pluggable Transceivers Installation Guide.

  

  Note

  All 48 ports can provide PoE power.
• LEDs to indicate port status and switch operating conditions

  For a description of the LEDs and their operation, see Summit X450, X450a, and X450e Series Switch LEDs.

• Stack number indicator showing the position of this switch in a stacked configuration
• Serial console port used to connect a terminal and perform local management.

Summit X450e-48p Switch Front Panel

The rear panel of the Summit X450e-48p switch (Summit X450e-48p Switch Rear Panel) includes:

• Slot for one of the Summit option cards listed in the following table. These port option cards allow you to add one or two high-speed uplink ports to the switch.

  

  Port Option Cards for Summit X450e Series Switches

  Option Card Model	Type of Added Ports	For More Information
  XGM2-2xn option card	10-gigabit XENPAK modules	Summit XGM2-2xn Option Card
  XGM2-2xf option card	10-gigabit XFP modules	Summit XGM2-2xf Option Card
  XGM2-2sf option card	10-gigabit SFP+ modules	Summit XGM2-2sf Option Card
  XGM2-2bt option card	Fixed 10GBASE-T copper	Summit XGM2-2bt Option Card

• Management port with associated LEDs
• Two high-performance stacking ports with associated LEDs
• Redundant power input connector for optional connection to the EPS-C chassis (Model No. 10912). This chassis can hold up to three EPS-600LS External Power Modules (Model No. 10913). The connecting redundant power supply cable is shipped with the EPS-C chassis.

  The PoE capability of the Summit X450e-48p switch varies depending on the number of external power modules in use. For more information, see Summit X450e-48p Power Supplies and EPS-600LS External Power Module.

• AC power input socket

  The power supply operates from 100 VAC to 240 VAC.

Summit X450e-48p Switch Rear Panel