Part numbers: 10051H, I-MGBIC-GSX, AA1419048-E6
The Industrial Grade SX SFP modules provide a 1000BASE-X optical connection using LC connectors and MMF (multimode fiber) cable up to 550 meters long. The SX SFP module conforms to the 1000BASE-SX standard.
For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.
Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.
When you plan an installation using the SX SFP module, Extreme Networks recommends that 3 dB of the total budget be reserved for losses induced by cable splices or connectors and operating margin.
There is no minimum attenuation or minimum cable length restriction.
The SX and Industrial Grade SX SFPs conform to the 1000BASE-SX standard.
The SX SFP module operates at a commercial temperature range (0°C to 70°C). The Industrial Grade SX SFP modules operate at a wide temperature range (-40°C to 85°C).
The following table lists specifications for the SX and Industrial Grade SX SFP modules.
| Parameter | Minimum | Typical | Maximum |
|---|---|---|---|
| Transmitter | |||
| Average launch power | -9 dBm | -6 dBm | -2.5 dBm |
| Center wavelength | 830 nm | 850 nm | 860 nm |
| Receiver | |||
| Receive sensitivity | NA | NA | -17 dBm |
| Average receive power (max) | NA | NA | 0 dBm |
| Operating wavelength | 770 nm | 850 nm | 860 nm |
| Link | |||
| Link power budget | NA | NA | 7.5 dB |
| Operating distance | NA | NA | 550 m |