Part number: AA1419074-E6
The 100BASE-FX SFP transceiver provides 100 Mbps Ethernet Carrier Sense Multiple Access with Collision Detection (CSMA-CD) connectivity using multimode optical fiber.
For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.
Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.
The following table lists specifications for the 100BASE-FX SFP transceiver.
| Parameter | Specification |
|---|---|
| Maximum electrical power consumption | 1.5 watt (W) |
| Connectors | Duplex LC |
| Cabling | 62.5 μm MMF optic cable 50 μm MMF optic cable |
| Distance | Up to 2 km using 500 MHz-km MMF optic cable |
| Wavelength | 1300 nm |
| Link optical power budget | 10 dB |
| Transmitter | |
| Maximum launch power | –14 dBm |
| Minimum launch power | –23.5 to –20 dBm |
| Receiver | |
| Receiver sensitivity | –33.5 dBm |
| Maximum input power | –14 dBm |