Part numbers: 10310, AA1403016-E6
The ZR SFP+ module is a long-haul SFP+ module that provides a 10GBASE-X optical connection using LC connectors and SMF cable up to 80 km long.
For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.
Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.
Measure cable plant losses with a 1550 nm light source and verify this to be within budget.
When you calculate the maximum distance attainable using optical cable with a specified loss per kilometer (for example, 0.25 dB/km), Extreme Networks recommends that you reserve 3 dB of the total budget for losses induced by cable splices or connectors and operating margin. A minimum system budget or attenuation is required to prevent saturation of the receiver.
The following table lists specifications for the ZR SFP+ module.
| Parameter | Minimum | Typical | Maximum |
|---|---|---|---|
| Average launch power | 0 dBm | NA | 4 dBm |
| Center wavelength | 1530 nm | 1550 nm | 1570nm |
| Receiver sensitivity in OMA | NA | NA | –24 dBm |
| Average Receive Power (max) | NA | NA | -7 dBm |
| Operating Wavelength | 530 | 550 | 1570 |
| Operating Distance | NA | NA | 80 km |