Part number: 10053H
The ZX SFP module is a long-haul SFP that provides a 1000BASE-X optical connection using LC connectors and SMF cable up to 80 km long.
For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.
Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.
Measure cable plant losses with a 1550 nm light source and verify this to be within budget.
When you calculate the maximum distance attainable using optical cable with a specified loss per kilometer (for example, 0.25 dB/km), Extreme Networks recommends that you reserve 3 dB of the total budget for losses induced by cable splices or connectors and operating margin. A minimum system budget or attenuation is required to prevent saturation of the receiver.
The following table lists specifications for the ZX SFP module.
| Parameter | Minimum | Typical | Maximum |
|---|---|---|---|
| Transmitter | |||
| Average launch power | -2 dBm | 0 dBm | 3 dBm |
| Center wavelength | 1530 nm | 1550 nm | 1570 nm |
| Receiver | |||
| Receive sensitivity | NA | NA | -24 dBm |
| Average receive power (max) | NA | NA | -3 dBm |
| Operating wavelength | 1530 nm | 1550 nm | 1570 nm |
| Operating distance | NA | NA | 80 km |