Part numbers: 10G-SR-SFP300M-ET, AA1403015-E6HT
The 10GBASE-SR/SW SFP+ high temperature transceivers (0°C to 85°C) provide 10 GbE service at 850 nm, over distances of 300 m (10G-SR-SFP300M-ET) or 10 km (AA1403015-E6HT).
Warning
To prevent damage to the optical receiver, ensure that at least 1 dB of attenuation exists between the transmit and receive ports.
For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.
Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.
For more information about the 10GBASE-SR/SW SFP+ high temperature transceiver, including test and measurement information, see the IEEE 802.3ae standard.
The following table lists specifications for the 10 km transceiver. The specifications listed are for part AA1403015-E6HT. Specifications for other parts are substantially similar but might not be identical.
| Parameter | Specification |
|---|---|
| Data rate | 10 Gigabits per second (Gbps) |
| Line rate (64B/66B code) | 10.3125 Gbps ± 100 parts per million (ppm) |
| Center wavelength range | 840 to 860 nanometers (nm), nominal 850 nm |
| Distance | Up to 10 km |
| Link optical power budget | 9.4 dB |
| Maximum transmitter and dispersion penalty | 3.2 dB at 10 km |
| Operating case temperature range | -5°C to 85°C |
| Transmitter | |
| Line rate (nominal) | 10GBASE-LR 10.3125 Gbps ±100 ppm (10 GbE) |
| Average launch power | -8.2 to 0.5 dBm |
| Minimum launch power in OMA minus transmission and dispersion penalty (TDP) | -6.2 dBm |
| Minimum optical modulation amplitude | -5.2 dBm |
| Minimum extinction ratio | 3.5 dB |
| Maximum optical return loss tolerance | -12 dB |
| Maximum transmitter reflectance | -12 dB |
| Receiver | |
| Line rate (nominal) | 10GBASE-LR 10.3125 Gbps ± 100 ppm (10 GbE) |
| Average receive power for BER 10-12 | -14.4 dBm to 0.5 dBm |
| Maximum average receive power for damage | -1.5 dBm |
| Maximum receiver sensitivity in OMA | -12.6 dBm |
| Maximum receiver reflectance | -12 dB |
| Stressed receiver sensitivity in OMA | -10.3 dBm |