Part number: 10329
The Bidirectional QSFP+ module provides 40 Gb connections over a single pair of MMF cables (OM3/OM4), using bidirectional optical connections on each fiber. Each fiber carries bidirectional 20 Gb data channels at distances up to 100 meters.
Only single 40 Gb Ethernet channels are supported. Four-by-10 Gb Ethernet channel breakout is not supported with this module. Duplex LC connectors are used on the transceiver.
For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.
Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.
The following table lists specifications for the Bidirectional MMF QSFP+ module.
| Parameter | Value |
|---|---|
| Transmitter | |
| Average launch power, each lane | 5 dBm (maximum) -4 dBm (minimum) |
| Center wavelength: Tx1 | 850 nm |
| Center wavelength: Tx2 | 900 nm |
| Receiver | |
| Average receive power each lane | 5 dBm (maximum) -7 dBm (minimum) |
| Operating wavelength: Rx1 | 900 nm |
| Operating wavelength: Rx2 | 850 nm |
| Link | |
| Link power budget | 3 dB |
| Operating distance: OM3 / OM4 MMF | 100 m |
| Connection | Duplex LC |