Part number: I-MGBIC-LC03
The LX Industrial Grade SFP module supports 1000BASE-X connection using LC connectors and OM1 multimode fiber up to 2 km, and supports OM2/OM3/OM4 multimode fiber up to 1 km, without the use of mode conditioning patch cords. This LX Industrial Grade SFP module operates at a wide temperature range (-40°C to 85°C).
For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.
Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.
The following table lists specifications for the LX Industrial Grade SFP module for multimode fiber.
| Parameter | Minimum | Typical | Maximum |
|---|---|---|---|
| Average launch power | -9 dBm | NA | -1 dBm |
| Center wavelength | 1270 nm | 1310 nm | 1355 nm |
| Receiver sensitivity | -19 dBm | NA | -1 dBm |
| Operating distance - OM1 MMF 62.5 µm | NA | NA | 2 km |
| Operating distance - OM2/OM3/OM4 MMF | NA | NA | 1 km |
Note
No mode conditioning patch cord is required.