Part number: AA1403013-E6
The 10GBASE ER/EW SFP+ transceiver provides a reach of up to 40 km at a wavelength of 1550 nm.
For more information about the 10GBASE-ER/EW SFP+ transceiver, including test and measurement information, see the IEEE 802.3ae standard..
For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.
Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.
The following table lists specifications for the IEEE 802.3ae 10GBASE ER/EW SFP+ transceiver.
| Parameter | Specification |
|---|---|
| Line rate (nominal) | 10GBASE-ER/EW 10.3125 Gb/s ±100 ppm (10 GbE) |
| Center wavelength range | 1530 to 1565 nm; nominal 1550 nm |
| Distance | Up to 40 km |
| Link optical power budget | 15 dB |
| Transmitter and dispersion power penalty | 3.0 dB at 40 km |
| Transmitter | |
| Launch power | –47 to 4.0 dBm |
| Minimum side mode suppression ratio | 30 dB |
| Minimum launch power in OMA minus transmission and dispersion penalty (TDP) | –2.1 dBm |
| Minimum optical modulation amplitude | –1.7 dBm |
| Maximum average launch power of OFF transmitter | –30 dBm |
| Minimum extinction ratio | 3.0 dB |
| Maximum RIN12OMA | –128 dB/Hz |
| Maximum optical return loss tolerance | –21 dB |
| Receiver | |
| Average receive power for BER 10–12 | –15.8 to –1.0 dBm |
| Maximum receive power for damage | 4.0 dBm |
| Maximum receiver sensitivity in OMA | –14.1 dBm |
| Maximum receiver reflectance | –26 dB |
| Stressed receiver sensitivity in OMA | –11.3 dBm |
| Receive electrical 3 dB upper cutoff frequency (maximum) | 12.3 GHz |