Part numbers: 10406, 100G-SWDM4-QSFP100M
The 100 Gb QSFP28 SWDM4 (Short-wave, wave division multiplexed 4-lane) transceiver supports up to 100 meter connections on OM3 and OM4 multimode fiber using duplex fiber.
For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.
Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.
The following table lists specifications for the SWDM4 QSFP28 module. The specifications listed are for part 10406. Specifications for other parts are substantially similar but might not be identical.
| Parameter | Value |
|---|---|
| Operating distance (nominal) | 75 m OM3 100 m OM4 150 m OM5 |
| Connector | Duplex LC |
| Fiber type | Duplex multimode fiber: OM3 / OM4 / OM5 |
| Forward Error Correction | IEEE 802.3 Clause 91 RS-FEC required on host switch |
| Transmitter | |
| Power per lane | -3 dBm (min) 3.6 dBm (max) |
| Center wavelengths | 850 / 880 / 910 / 940 nm |
| Receiver | |
| Receiver sensitivity per lane | -5.2 dBm (min) 3.4 dBm (max) |
| Wavelengths | 850 / 880 / 910 / 940 nm |