Part number: 10326
The 40 Gb QSFP+ PSM transceiver (10326) supports up to 10 km over single-mode fiber using an 8 parallel fiber MPO interface. Each fiber pair can be broken out to a 10 Gb Ethernet connection, compatible with up to four 10GBASE-LR interfaces. The MPO to 4xLC SMF patch cord (10327) can be used to break out the 4-fiber pair of the MPO parallel connector to four separate fiber pairs.
For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.
Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.
The following table lists specifications for the 40 Gb LR4 PSM QSFP+ module.
| Parameter | Value |
|---|---|
| Transmitter | |
| Power | 1.5 dBm (maximum) -6 dBm (minimum) |
| Center wavelength | 1310 nm |
| Receiver | |
| Receiver sensitivity | 2.3 dBm (maximum) -12.7 dBm (minimum) |
| Wavelength | 1355 nm (maximum) 1260 nm (minimum) |
| Operating distance (nominal) | 10 km |
| Connector | MPO/MTP 8 fiber |
| Fiber type | SMF (single-mode fiber) |
For 10 Gb breakout, the MPO to 4xLC duplex connectors SMF fanout patch cord (10327) can be used with the 40 Gb LR4 PSM QSFP+ module.