100 Gb CWDM4-Lite SMF QSFP28 Module

Part number: 10450

Each CWDM4-Lite (coarse wavelength division multiplexing, 4-lane) QSFP28 module provides a 100 Gb optical connection using LC duplex optical connectors over single-mode fiber up to 500 meters.

For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.

Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.

100 Gb CWDM4-Lite QSFP28 Module Specifications

The following table lists specifications for the CWDM4-Lite QSFP28 modules.

Table 1. 100 Gb CWDM4-Lite QSFP28 Specifications
Parameter Value
Operating distance (nominal)

500 meters

Connector Duplex LC
Fiber type SMF
Case Operating Temperature 15° to 55°C
Note: Reduced operating temperature range from conventional commercial range.
Forward Error Correction IEEE 802.3 Clause 91 RS-FEC required on host switch
Transmitter
Power per lane -7.5 dBm (min)

2.5 dBm (max)

Center wavelengths 1271 / 1291 / 1311 / 1331 nm
Receiver
Receiver sensitivity per lane -11.0 dBm (min)

2.5 dBm (max)

Wavelength 1264.5 nm (min)

1337.5 nm (max)