LR/LW High Temperature SFP+ Module

Part number: AA1403011-E6HT

The 10GBASE-LR/LW SFP+ high temperature transceiver (–5°C to 85°C) provides 10 GbE or OC-192 service at a nominal wavelength of 1310 nm. This SFP+ transceiver can attain link lengths of up to 10 km.

For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.

Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.

LR/LW SFP+ High Temperature Module Specifications

For more information about the 10GBASE-LR/LW SFP+ (–5°C to 85°C), including test and measurement information, see the IEEE 802.3ae standard.

The following table lists the specifications for this transceiver.

Table 1. LR/LW SFP+ High temperature Module Specifications
Parameter Specification
Center wavelength range 1260 to 1355 nm; 1310 nm nominal
Distance
Using 62.5 μm MMF optic cable:
  • 160 MHz-km fiber: 2 to 26 m
  • 200 MHz-km fiber: 2 to 33 m
Using 50 μm MMF optic cable:
  • 400 MHz-km fiber: 2 to 66 m
  • 500 MHz-km fiber: 2 to 82 m
  • 2000 MHz-km fiber (OM3): 2 to 300 m
  • 4700 MHz-km fiber (OM4): 2 to 400 m
Link optical power budget 3.8 dB
Maximum transmitter and dispersion penalty 3.9 dB at 300 m
Operating case temperature range 0°C to 85°C
Transmitter
Root-mean-square spectral width 0.05 to 0.40 nm
Launch power -7.3 to -1.0 dBm
Minimum extinction ratio 3.0 dB
Maximum optical return loss tolerance -12 dB
Receiver
Average receive power for BER 10-12 -9.9 dBm to -1.0 dBm
Receiver damage threshold 0 dBm
Maximum receiver sensitivity in OMA -11.1 dBm
Maximum receiver reflectance -12 dB
Stressed receiver sensitivity in OMA -7.5 dBm
121140-07 Rev. 03