1 Gb LX SFP LC DDI Modules

Part numbers: MGBIC-LC09, AA1419049-E6

The 1000BASE-LX SFP LC DDI transceiver provides 1000BASE-LX Gigabit Ethernet connectivity at 1310 nanometers (nm) using single mode or multimode optical fiber.

For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.

Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.

1 Gb LX SFP LC DDI Module Specifications

The following table lists the specifications for the 1000BASE-LX SFP LC DDI transceiver.

Table 1. 1 Gb LX SFP LC DDI Module Specifications
Parameter Specification
Maximum electrical power consumption 1.0 watt (W)
Connectors Duplex LC
Cabling
  • 50 micrometer (μm) MMF (multimode fiber)
  • 62.5 μm multimode fiber
  • 9 μm SMF (single mode fiber)
Distance
  • Up to 550 meters (m) using MMF
  • Up to 10 kilometers (km) using SMF
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Link optical power budget 9.5 dB
Transmitter
Launch power -9.5 to -3.0 dBm
Receiver
Receiver sensitivity -19.0 dBm
Maximum receiver power -3.0 dBm
121140-07 Rev. 03