Part number: 10331
The CFP2 SR10 module is a 10-channel pluggable, parallel, fiber-optic transceiver for 100 Gigabit Ethernet applications.
The transceiver supports high speed serial links over multimode fiber for link distances up to 100 meters with OM3 fiber or 150 meters with OM4 fiber. With an optional break-out cable, the CFP2 SR10 module can support ten 10-gigabit data lanes. The CFP2 SR10 module uses a 24-fiber MPO fiber optic connector.
For a complete listing of hardware compatible with these modules, see the Extreme Optics Compatibility website.
Transmission distances are provided as a nominal guide only. To determine achievable distances, refer to the device's optical specifications and to the specific characteristics of your fiber installation.
The CFP2 SR10 module is compliant to 100 GbE specifications 802.3ba (100GBASE-SR10, CAUI and CPPI) up to 100 meters OM3 and 150 meters OM4 fiber.
Mechanical dimensions, connecters, and footprint of the module conform to the CFP MSA CFP2 Hardware Specification Revision 1.0 July 31, 2013 standard.
This module is a Class 1M laser device.
The following table lists specifications for the CFP2 SR10 module.
| Parameter | Minimum | Typical | Maximum |
|---|---|---|---|
| Transmitter | |||
| Average launch power, each lane | -6.5 dBm | NA | 4.0 dBm |
| Center wavelength | 840 nm | NA | 860 nm |
| Receiver | |||
| Stressed receiver sensitivity in OMA, each lane | -5.4 dBm | NA | - |
| Average receive power (max), each lane | -9.5 dB | NA | 2.4 dBm |
| Operating wavelength | 840 nm | NA | 860 nm |
| Operating Distance | |||
|
OM3 fiber OM4 fiber |
NA | NA |
100 m 150 m |