Configure the Insight Interface TVPM Endpoint for Analytic Mirroring

Start TVPM.
```
device# tvpm start
```
From a Linux prompt, configure eth1 to promiscuous mode.
```
bash# ifconfig eth1 promiscuous
bash# tcpdump -i eth1
```
In global configuration mode, specify a port-channel. You can create a new port-channel or use an existing unconfigured port-channel. The Insight Interface can only be configured on one port-channel
```
device(config)# interface port-channel 20
```
In interface subtype configuration mode, enter the insight enable command.
```
device(config-Port-channel-20)# insight enable
```

Enable the interface.

device(config-Port-channel-20)# no shutdown

From the SLX CLI, configure the session monitor.

device(config)# monitor session 1
	device (config-session-1)# source ethernet 0/49 destination port-channel 20 direction both