Specifying a TCAM profile

  1. Enter global configuration mode. 
    device# configure terminal
  2. Enter the hardware command to enable hardware configuration mode. 
    device(config)# hardware
  3. Enter the profile tcam command to specify a TCAM profile. 
    device(config-hardware)# profile tcam multicast-profile
  4. Return to privileged EXEC mode. 
    device(config-hardware)# end
  5. Save the configuration. 
    device# copy running-config startup-config
  6. Enter the reload system command to reboot the device. 
    device# reload system
9038043-00 Rev AA