Locate Device Utility

Use the Locate Device utility to alter the status LED on APs and Switch Engine devices so that you or an assistant at a remote site can locate the physical device more easily. You can also turn the LED off, which can be useful when an AP is mounted near a projection screen or is in a location where the light can be distracting.

  1. Go to Manage Device and select a single device.
  2. Utilities > Tools.
  3. Select Locate Device.
  4. Set the LED timeout, between 10-300 seconds.


    The default timeout is 300 seconds.
  5. Select Submit.
  6. To return the LED to normal operation, select Return to normal LED operations.