Monitor Switches

The Monitor Overview tab is the default display that provides the overall health of the device. The page starts with the topology overview graphic at the top, followed by the device overall health timeline graph. By default, this timeline displays data for the last 24 hours, but you can change the time range by Day, Week, or Month, and for 1, 2, 4, 8, and 24 hour durations.
Hover the cursor over the different icons to display:

In the port graphic section, select an individual port to display its details. Under Actions, use the Bounce Port button to reset the port. A green port is connected. A grayed-out port is disconnected. A red port was disconnected by the Admin. Use Run Cable Test to test the physical cables connected to Switch Engine switch stack ports. See Use Cabletest for Switch Engine Device Duplex or Speed Issues.

A table of port details and Storm Control parameters follows the port graphic section, followed by the Active Alarms overview graphic.

To view the Storm Control parameters, add Storm Control from the column picker.

Use the remaining Monitor tabs to view the following: