Multiple APs Event Level Override

Event Level is configured in the configuration Profile for the device group. Additionally, configure the Event Level override for individual APs from the Advanced Settings Overrides tab, or override the Event Level for multiple APs from the Device List Actions menu. Overriding the Event Log Level for one or more specific APs can be helpful when troubleshooting.

To override the Event Level on multiple APs:

  1. Go to Configure > Devices > Access Points.
  2. Select one or more devices from the Access Points List.
  3. Select Actions > AP Event Level.
  4. Select Enable to enable the Select AP Event Level field.
  5. Select the event level.
    • Critical
    • Major
    • Minor
    • Info
  6. Select OK.
    All APs that were selected from the Device List are updated with the selected event level.
9038918-00 Rev. AA