Smart RF Widgets Per Site

You can get Smart RF information at the site level. To view Smart RF data for a site:

1. Go to Monitor > Sites.
2. Select a site.
3. Select Smart RF.
4. Select a radio band. Data is displayed for the selected radio band.

Smart RF data per site

Smart RF data per site illustrates the following RF data for the selected site:

• Number of device groups with Smart RF Monitoring enabled.
• Number of device groups with Smart RF Monitoring disabled.
• Number of device groups using Automatic Channel Selection (ACS). AP39xx access points support ACS as the RF Management policy.
• Number of device groups using Static RF. Static RF represents APs that are configured for static RF channels – not Smart RF or ACS. Select View Access Points to display a list of access points that are running fixed channels. The AP List that displays indicates whether or not Smart RF is in use for each radio.

  

  AP List with RF Policy

  

• Smart RF policies in use for the selected site. RF policies are defined at the Device Group level. These are policies that are assigned to devices groups that are associated with the site.

  Select the policy link to display the Edit RF Management Policy page.

• ACS policies in use for the selected site.

The following data for a site is displayed in the site widgets:

• APs per Power level.
• APs per Channel
• Mitigation
• Mitigation History