The selected Access List Mode applies to all access points in the site. The access
list is stored on the AP and shared across the site. A client IP address on the site
Deny List, cannot connect to a network broadcast by any AP associated with the
site.
-
Go to and select a site.
-
Select Allow List/Deny List tab.
-
Select Enforce Client Address protection.
-
Select the Mode: Allow List or Deny
List.
- To add an IP addresses to the list, select Add
and enter a IP address for the client.
- To delete an IP address from the list, select the IP address from the
list, then select Delete.
- To select the entire list, select the IP Address
check box.
