The filter parameters for an adoption rule depend on the type of device associated with the
rule and the defined action. Rules can be configured for device adoption, denial, and
redirection to a different ExtremeCloud IQ
Controller.
IP Address/CIDR
Filter the APs or switches by IP address,
adopting APs into the specified device group based on their IP address. CIDR field is used along with IP address field to find the
IP address range.
For switch adoption rules, specify
the management IP address.
Host Name
Filter the APs by host name, adopting APs
into the specified device group based on their host name. This field matches on sub
strings.
For switch adoption rules, use the system name. The full host or system name
is not required for a match.
Model
Model number on the device. This field
matches on sub strings. The full model number is not required for a match.
Serial Number
Serial number on the device. Serial
number requires an exact string
match.
Note
Each filter value can only be applied once to a single rule.
