ExtremeCloud IQ Controller User Guide

If configured to do so, ExtremeCloud IQ Controller logs all AP events. You can view a record of the AP event in the user interface.

Configure the AP Event Level

Configure the AP Event Level one of the following ways:

From the device group Advanced Settings.
Override the device group level for a single AP one of two ways:
- From the device Advanced Settings Overrides. Or,
- From the AP Events tab, Event Level Override.
  1. Go to Monitor > Devices > Access Points.
  2. Select an AP.
  3. Select Events > Event Level Override.
From the Device List Actions menu, to override the level for multiple APs.

AP Events information

AP Events include the following information:

Date and time stamp
AP Name
AP Serial Number
The severity type for the AP event
Category
Message

Note

In a High Availability Pair, the AP Events do not synchronize when the link between appliances is down, and no further synchronization is performed for the unsynchronized events after the connection is restored.

View AP Events

To view AP Events from the Logs screen:

Go to Tools > Logs > AP Events.
(Optional) Search for a specific AP event.
Set a filter or use the default filter.
Press Enter to execute a search.The AP Events list is updated.
(Optional) Select to export the data and manage which columns display.

To view event data for a specific AP from the AP page:

Go to Monitor > Devices > Access Points.
Select an AP.
Select the AP Events tab.

View All AP Events

Configure the AP Event Level

AP Events information

View AP Events