AP410e Professional Install
Settings
The AP410e is an indoor AP with external antennas. The AP410e has the following
antenna layout:
- Radio 1 and Radio 2 share
ports 1 and 2
- Radio 2 uses ports 3 and
4
- Radio 3 uses ports 5 and
6
- IoT radio uses port 7 (not
configurable)
The default value for Radios 1-3 is “No Antenna”, and the default value for the IoT
radio is “Internal."
The ports are grouped as follows. Each port in the group must be configured with the
same antenna model:
- Group 1 — Ports 1 through
4
- Group 2 — Ports 5 and 6
Note
To display the
Professional
Install dialog, the AP must be part of an AP410e device
group.
AP410e Professional
Install Settings
