The following rules apply to AP510e antenna installation:
- Group 1 (2.4GHz/5GHz) accepts
identical dual band antennas.
- Group 2 (5GHz) accepts
identical 5G or dual band antennas.
- Antennas must
be configured consecutively for each group. Group 1 starts with Port 1/Group
1 and Group 2 starts with Port 5/Group 2. An equal number of antennas must
be configured for both groups. For example, to support a 4x4 deployment,
install Group 1 & Group 2 — 4 antennas each. To support a 2x2
deployment, install Group 1 & Group 2 — 2 antennas each.
- Mode 1. Radios 1 and 2 are
enabled when:
- One or more antennas
are configured in Group 1.
- Mode 2. Radio 1
is a 2.4/5 GHz sensor and Radio 2 forwards traffic.
- Radio 2 WLAN
Service.
- Radio 2 5GHz WLAN service needs Group 1 antenna.
- Radio 1 – Sensor.
- Radio 1 2.4GHz sensor needs Group 1 antenna.
- 5GHz sensor need Group 2 antenna.
- Or, Dual-band sensor needs one or more antennas configured
in both Group 1 and Group 2.
- Mode 3. Radios are configured
Dual 5GHz mode.
- Radio 1 is enabled
only if one or more antennas are configured in Group 2.
- Radio 2 is enabled
only if one or more antennas are configured in Group
1.
