show network-clock sync-e ports

show network-clock sync-e port [port_list] {details}

Description

Displays information about synchronous Ethernet (SyncE).

Syntax Description

port_list

Specifies the port(s).

details

Show additional details.

Default

N/A.

Usage Guidelines

Use this command to display the SyncE configuration and port state on one or more ports. The following command will display the SyncE configuration and port state for all ports:

show network-clock sync-e ports

Example

The following command displays SyncE information for ports 1 - 12:

show network-clock sync-e ports 1-12

Following is sample output:

===================================================================
Port  Flags    Input        Configured    Output        Source 
            Clock Quality Clock Quality Clock Quality (Port Number)
===================================================================
1    S2       QL-SSU-A
2    S1       QL-PRC
3    S
4    S
5    S
6    S                                   QL-PRC        SOURCE-1 (2)
7    S
8    S
9    S
10   S
11   S
12   S
===================================================================
Flags   : (S) SyncE Supported, (N) SyncE Not Supported,
          (O) SyncE Supported for Output Only,
          (E) SyncE Enabled,   (f) Forced Source Clock,
          (1) Clock Source 1,  (2) Clock Source 2,

History

This command was first available in ExtremeXOS 15.1.

Platform Availability

This command is available on the ExtremeSwitching X460-G2.