configure vpls peer l2pt profile

configure {l2vpn} vpls vpls_name peer ipaddress l2pt profile [none | profile_name]

Description

Configures L2PT profiles on service interfaces.

Syntax Description

l2vpn Specifies the Layer 2 Virtual Private Network.
vplsvpls_name Specifies Virtual Private LAN Service over MPLS, and the alphanumeric string identifying the VPLS VPN.
peer ipaddress Specifies the VPLS peer, and the IPv4 address.
l2pt profile Specifies Layer 2 protocol tunneling and the L2PT profile for the PW.
none Specifies that no L2PT profile should be bound to the PW (default).
profile_name Specifies the L2PT profile to be bound to the PW.

Default

Disabled.

Usage Guidelines

Use this command to configure L2PT profiles on service interfaces.

Example

The following example unbind the L2PT profile from peer 1.1.1.1 of VPLS cust2:

configure l2vpn vpls cust2 peer 1.1.1.1 l2pt profile none

The following example binds my_l2pt_prof with peer 1.1.1.1 of VPLS cust1. my_l2pt_prof specifies tunneling actions:

configure l2vpn vpls cust1 peer 1.1.1.1 l2pt profile my_l2pt_prof
Error: Tunnel action may be applied only to ports.

History

This command was first available in ExtremeXOS 15.5.

Platform Availability

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.