configure ports partition

configure ports [port_list | all] partition [1x100G | 1x40G | 2x50G | 4x10G | 4x25G]

Description

Partitions 100G and 40G ports into multiple partition speeds. Also, for ExtremeSwitching X465 series switches, partitions 25G ports into a single 10G port.

Syntax Description

port_list

Specifies one or more ports.

all

Specifies all ports.

1x100G

Specifies partitioning a 100G port into a single 100G port (applies only to switches with 100G port(s)).

1x40G

Specifies partitioning a 40G port into a single 40G port (applies only to switches with 40G port(s)).

2x50G

Specifies partitioning a 100G port into a two 50G port (applies only to switches with 100G port(s)).

4x10G

Specifies partitioning a 40G port into a four 10G port (applies only to switches with 40G port(s)).

Specifies partitioning a 25G port into a single 10G port (applies only to X465 and X695). Apply 4x10G option on:
  • X465: first VIM port (port 25 on 24-port models, and port 49 on 48-port models).
  • X695: ports: 1–48.

4x25G

Specifies partitioning a 100G port into a four 25G port (applies only to switches with 100G port(s)).

Default

For 40G ports the default partition is 1x40G.

For 100G ports the default partition is 1x100G.

For X465, 25G ports default to 1x25G.

Usage Guidelines

Use this command to partition 100G and 40G ports into multiple partition speeds, and for ExtremeSwitching X465 series switches, partitions25G ports into a single 10G port.

For ExtremeSwitching X465 series switches, to partition a 25G port into a single 10G port, . apply the 4x10G option on the first VIM port (port 25 on 24-port models, and port 49 on 48-port models).

Example

The following example partitions port 6:1 into four 10G ports:

configure ports 6:1 partition 4x10G

History

This command was available in ExtremeXOS 12.6.

This command was expanded to include partitioning 100G ports in ExtremeXOS 22.2

Dynamic partitioning (no reboot required) was added in ExtremeXOS 30.2.

Platform Availability

This command is available on the following switch models:
Table 1. QSFP28 and QSFP+ Port Partitioning
Switch model Port bandwidth Port partitions
X465 (all models)

SFP28

25 Gb One 10 Gb port
X465 (all models)

QSFP+

40 Gb One 40 Gb port or

Four 10 Gb ports

X670-G2-48x-4q

QSFP+

40 Gb One 40 Gb port or

Four 10 Gb ports

X590 (all models)

QSFP28 and QSFP+

100 Gb One 100 Gb port with one of the following:
  • Two 50 Gb ports
  • Four 25 Gb ports
40 Gb One 40 Gb port or

Four 10 Gb ports

X690 (all models)

QSFP28 and QSFP+

100 Gb One 100 Gb port with one of the following:
  • Two 50 Gb ports
  • Four 25 Gb ports
40 Gb One 40 Gb port or

Four 10 Gb ports

X695 (all models)

QSFP

100 Gb One 100 Gb port (default) with one of the following:
  • Two 50 Gb ports
  • One 40 Gb port
  • Four 25 Gb ports
  • Four 10 Gb ports
X870 (all models)

QSFP28 and QSFP+

100 Gb One 100 Gb port with one of the following:
  • Two 50 Gb ports
  • Four 25 Gb ports
Note: On X870-96x-8c series switches, an optional Switch Port Speed License is required to increase the data rate to 100 Gb on physical ports 1 through 24. No license is required for 100 Gb capability on physical ports 25 through 32.
40 Gb One 40 Gb port or

Four 10 Gb ports