Displays the specified access list meter statistics and configurations.
| meter-name | Specifies the ACL meter to display. |
| out-of-profile | Show the meter out-of-profile status. |
| disabled-ports | Show the meter out-of-profile status that resulted in disable-port action. |
| port_list | Specifies the port list name to display the meters on. |
| port_group | Specifies a port group name to display the meters on. |
| vlan_name | Specifies to display the meters on the VLAN. |
| global-count | Counter of all the rules using a per-port meter. |
| ingress | ACLs applied to ingress. |
| egress | ACLs applied to egress. |
N/A.
Use this command to display the ACL meters.
The following example displays access list meter information for port 7:1:
# show access-list meter ports 1-4
==========================================================================
Policy Name Vlan Name Port
Committed Max Burst Out-of-Profile Out-of-Profile
Meter Rate (Kbps) Size Action DSCP Packet Count
===============================================================================
(none) * 2
ingmeter3 3000000 Kbps 300000 Kb - - - Dr - 123456
ingmeter4 4000000 pps 400000 pkt - - - Dr - 0
(none) * 3
ingmeter12 Max 123456 Kb - - - Dr - 0
ingmeter3 3000000 Kbps 300000 Kb - - - Dr - 0
ingmeter4 4000000 pps 400000 pkt - T - Dr - 0
(none)
ingmeter12 Max 123456 Kb L T D DrP 64 871234
ingmeter3 3000000 Kbps 300000 Kb - - D Dr - 0
ingmeter4 4000000 pps 400000 pkt L - D Dr - 0
Action : (D) Disable Port, (Dr) Drop, (DrP) Set Drop Precedence,
(L) Log, (T) Trap
This command was available in ExtremeXOS 11.1.
This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.