configure mac-locking ports static

configure mac-locking ports port_list static [add | enable | disable] station station_mac_address

Description

Creates, enables, and disables a static MAC locking entry.

Syntax Description

port_list Specifies one or more ports or slots and ports.
add Adds a MAC locking association between the specified MAC address and port.
enable Enables an existing MAC locking association between the specified MAC address and port.
disable Disables an existing MAC locking association between the specified MAC address and port.
station_mac_address Specifies the MAC address.

Default

A static MAC locking association is enabled by default.

Usage Guidelines

Up to 64 MAC addresses can be locked per port.

When added and enabled, a static MAC lock configuration allows only the end station designated by the MAC address to participate in frame relay.

Disabled entries are counted when calculating the total number of locked stations.

Example

The following example creates a MAC locking association between port 14 and 00-a0-c9-0d-32-11.

configure mac-locking ports 14 static add 00-a0-c9-0d-32-11

History

This command was first available in ExtremeXOS 15.7.1.

Platform Availability

This command is available on the ExtremeSwitching X435, X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, X695, and X870 series switches.